Competitive sorption of intermixed heavy metals in water repellent soil in Southern Australia

In water repellent soil, Cr, Pb and Cu showed higher adsorption intensities than Zn, Cd and Ni did. Soil water repellency is much more widespread than formerly thought. In order to promote fertility and productivity, the irrigation of recycled water onto water repellent soil may be an applied technology to be used in some areas of Southern Australia. Therefore, heavy metals in recycled water potentially enter into the soil. The competitive sorption and retention capacity of heavy metals in soil are important to be determined, especially considering the special geochemical origin of water repellent soil that was caused by waxes on or between the soil particles. Batch equilibrium sorption experiments on Cd, Cr, Cu, Ni, Pb and Zn in their typical proportion in recycled water were conducted in water repellent soil. The sorption intensity, sorption isotherm in the experiments together showed that Cr, Pb and Cu have higher sorption intensity than those of Zn, Ni and Cd in the competitive system. The risk assessment for the application of recycled water onto water repellent soil is definitely necessary, especially for the metal cations with relatively weak sorption.

Sorption and Fractionation of Copper in soil at a sewage irrigation farm in Australia

Copper (Cu) is an important heavy metal to be considered in soil contamination, because high concentrations of copper in soil produce toxic effects and may accumulate in plant tissues. In Australia's oldest sewage irrigation farm, located in Werribee, Victoria, soil in the land filtration area is contaminated by Cu. However, Cu content in herbage tissues is in the normal range and has been trending downward since 1979. Therefore, studies on the sorption capacity and sequential extraction of Cu in soil at the Werribee Farm is of significance, not only for better understanding the mechanism of transport, chemical processes, and plant uptake of Cu, but also in providing information for the practical management of sewage farm soils. Methods of combining sorption isotherms with sequential extraction procedures were adopted, and the results showed that the soil in the land filtration area at Werribee Farm has a high sorption capacity for Cu, and distribution coefficients, K_f of Cu, were 629 L kg^-1 in surface soils (0-20 cm) and 335 L kg^-1 in subsurface soils (20-40 cm). The sequential extraction fractions demonstrate that exchangeable and carbonate fractions are very low, only comprising 3.49 to 5.49% of total copper. The other fractions are also discussed. This characteristic of Cu in soil is related to the low concentration of Cu in plant tissues.

Characterization and sorption ability of wool powder

This work focused on the characterisation of wool powders and their sorption capacity for dyes and metal ions. It provides new information to the field of wool and the potential use of wool to sorb contaminants from wastewater. It also suggests a new use for inferior and waste wool.

Fabricating and characterising silk powder for biomedical and sorption applications

This research developed a milling technology for ultrafine silk particles and designed novel biocompatible and biodegradable silk composites for repairing hard tissue defects. It also demonstrated high and rapid reversible ion binding properties of silk particles and thereby opened up their application opportunities as advanced green sorbents.

Evaluation of cassava peel waste as lowcost biosorbent for Ni-sorption : equilibrium, kinetics, thermodynamics and mechanism

The feasibility of cassava peel waste for Ni-sorption is evaluated in this work. The biosorbents are characterized by Boehm titration, Fourier transform-infra red (FTIR) spectroscopy, Nitrogen sorption, scanning electron microscopy-energy dispersive X-ray (SEM-EDX) analysis (e.g. elemental mapping) and X-ray photoelectron spectroscopy (XPS). Adsorption experiments are performed in batch mode at 30 °C (303.15 K), 45 °C (318.15 K) and 60 °C (333.15 K). The performance of several temperature dependence forms of isotherm models e.g. Langmuir, Freundlich, Sips and Toth to represent the adsorption equilibrium data is evaluated and contrasted. Sips model demonstrates the best fitting with the maximum uptake capacity for Ni(II) ions of 57 mg/g (0.971 mmol/g) at pH 4.5. For kinetic data correlation, pseudo-second order model shows the best representation. The chemisorption mechanism and thermodynamics aspect are also discussed.

Mercury vapor sorption and amalgamation with a thin gold film

Understanding the amalgamation mechanisms between mercury and gold is of fundamental interest and importance to many mercury sensing applications. However, there is only limited and piecemeal discussion in the literature of the mechanisms by which Au-Hg amalgams are formed on thin Au films. Here, we present a comprehensive description of a series of morphological changes occurring in a thin polycrystalline Au film during Au-Hg amalgamation investigated by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and atomic force microscopy (AFM). These microscopic investigations enable us to offer a coherent explanation for the features and the mechanisms of amalgamation of Hg with Au in the film. We also use an optical technique (fringes of equal chromatic order, FECO) to observe changes in optical thickness and reflectivity of the film. Amalgamation reactions in the film render it inhomogeneous, thus making optical techniques unsuitable as a method for quantitative monitoring of Hg vapor using Au films of this type.

Effects of clay amendment on adsorption and desorption of copper in water repellent soils

Copper is an important micronutrient and trace amounts are essential for crop growth. However, high concentrations of copper will produce toxic effects. Australia is increasingly developing production of crops in water repellent soils. Clay amendment, a common amelioration techniques used in Australia, has demonstrated agronomic benefits in increased crop or pasture production. The sorption and desorption of copper and the effect of clay treatment on copper behaviour in a water repellent soil collected from an experimental farm in South Australia is studied. We found that the water repellent soils amended with clay have an increased adsorption capacity of copper. Also the clay-amended soils had an increased ratio of specific sorption to total sorption of copper. The implications of this study to the sustainable agro-environmental management of water repellent soils is discussed.

Competitive sorbtion of metals in water repellent soils: implications for irrigation recycled water

Australia is a water-stressed nation and demand on potable water supply is increasing. Consequently water conservation and reuse are increasingly becoming important. Irrigation of recycled wastewater on water repellent soils is a technology that is being trialled as a means of improving crop production and conserving potable supply. However, recycled water contains potentially harmful heavy metals. This paper reports the competitive sorption and desorption of several common heavy metals found in soils collected from a farm located in the south-east of South Australia. The soil from this location is severely water repellent, but some sites were amended with kaolinite clay (Si₄Al₄O₁₀(OH)₈) about 7 and 15 years ago. The metals studied were Cu, Pb, Cd, Cr, Ni, and Zn. Competitive sorption of the metals was distinctly observed. For all heavy metals, the quantity of metal sorbed was higher in amended soil, and there was a strong correlation between the specific sorption to total sorption ratio and the amount of clay in the soil. The sorption intensities varied with metal, Cr, Pb, and Cu having a high sorption tendencies and Zn, Cd, and Ni having comparatively low sorption tendencies. The total sorption capacity for all metals increased in clay-treated soils compared with non-treated soils. On average, clay-amended water repellent soils had a 20–40% increased capacity to adsorb total metals; however, this increase was largely caused by the increased capacities to adsorb Zn, Cd, and Ni. The effect of clay treatment largely enhanced the sorption capacity of relatively weakly adsorbing heavy metals. The implications for using recycled wastewater on the long-term sustainable agro-environmental management of these soils are discussed.

Effects of leveling agent on the uptake of reactive dyes by untreated and plasma-treated wool

Atmospheric-pressure plasma treatment of wool fabric produced a significantly higher level of adsorbed fiber-reactive dye when applied at 50 °C (pH 3.0–6.0) in the absence of any organic leveling agent. In addition, color yields indicated that dye was more uniformly adsorbed by the plasma-treated fabric compared with the untreated material. When untreated fabric was dyed in the presence of a leveling agent (Albegal B), the extent and levelness of dye sorption were enhanced. These enhancements were, however, relatively small on the plasma-treated wool compared with those on untreated wool. A ‘surface’ mechanism, similar to that proposed when plasma-treated wool is dyed in the absence of leveling agent, can explain the leveling ability of Albegal B under adsorption conditions. Increasing the dyebath temperature to 90 °C resulted in dye penetration of the fibers. Under these conditions, any enhancements of dye uptake produced by the plasma treatment, as well as the use of Albegal B, were relatively small, in contrast to the behavior at 50 °C. Improvements in the uniformity of dye sorption observed at 50 °C were, however, maintained at the higher temperature. It is concluded that the inability of reactive dyes to migrate (and so promote leveling and uniformity) once they have reacted with the fiber, means that differences in the uniformity of dye sorbed at 50 °C are still apparent at equilibrium.

Heavy metal accumulation in soils at three field sites subject to effluent irrigation

Three field sites were chosen to study the environmental assimilative capacity of heavy metals in soil. These sites were the Werribee Farm and the Myome Farm in Australia and Shenyang Zhangshi Irrigation Area in China. The Werribee Farm and the Shenyang Zhangshi Irrigation Area received sewage treatment and application on land for a long time. The Myome farm is an experimental site in which investigations on land application of municipal wastewater on water repellent soils is currently being trailed. Heavy metal contamination, in particular Cr, Cu and Zn, in the Land Filtration soil of Werribee Farm was widespread. More than a century of sewage irrigation has occurred in the Werribee Farm. The temporal distribution pattern of heavy metals (Cd, Cr, Cu, Ni, Pb and Zn) in the soil at this site follow an exponential trend with time and the spatial distribution pattern of accumulation of heavy metals in different paddocks correlates with the number of years of sewage irrigation at that site in the Farm. Extensive sewage irrigation at Shenyang Zhangshi Irrigation Area resulted in significant Cd pollution in soil-plant (rice) system and poses a significant threat to the health of local people. Even after eight years since cessation of sewage irrigation, the bioavailable fractions of Cd in the soil as analyzed by sequential extraction techniques were very high thus illustrating long-term persistence. The simultaneous competitive adsorption of metals in water repellent soils (at Myome Farm in South Australia) was studied. In the competitive situation, Cr, Pb and Cu are the heavy metal cations more strongly adsorbed by the soil, whereas Cd, Ni and Zn are the least adsorbed. The increase in Freundlich adsorption capacity by clay amendment suggested that clayed soils are capable sorption of higher heavy metal loadings compared to the non-clayed water repellent soil, which is more vulnerable to heavy metal inputs. A simple model of environmental assimilative capacity is proposed. The results of comparison of the three field sites shows that the Werribee Farm has a higher environmental assimilative capacity of heavy metals in soil than the soils at Shenyang Zhangshi Irrigation Area and Myome Farm, however heavy metal contamination at Werribee Farm is still a concern. The model of environmental assimilative capacity of heavy metals in soil is an effective tool to assist management of effluent applied land irrigation systems and can be used to better design environmental engineering systems.

Role of water and surfactant in the solvent milling of wool

Unlike other fibres, wool felts readily when agitated in the presence of water. For this reason, only the minimum necessary quantity of water is used when the garments are drycleaned. However, wool fibres are often deliberately felted to obtain a warm bulky handle by controlled addition of water to the solvent. This process is known as solvent milling and recently, it has become a popular alternative to the traditional milling in water alone. Although the factors which influence milling in solvent are known, the relationships between them are not well defined. A comprehensive study of the relationship between water distribution and milling shrinkage during agitation of wool in perchloroethylene has been carried out in this thesis. The Karl Fischer method of determination was used throughout to establish the distribution of water between the wool fibre and the solvent liquor. The emphasis was placed on practical production variables. The role of surfactant in affecting milling shrinkage through its effect on the transport of water to the fibre from the solvent was examined. The ability of a suitable surfactant in promoting even and rapid sorption of water by the fibre was related to the colloidal properties of the milling liquor.

The characterization and chemical reactivity of powdered wool

Wool powders with various particle sizes have been produced using different milling techniques. Scanning electron microscopy (SEM) showed gradual breakdown of the fibre as it was progressively converted into powder form. Chlorination enhanced the effectiveness of subsequent air-jet milling. X-ray photoelectron spectroscopy (XPS) revealed an increase in the surface concentrations of oxygen and nitrogen, and a decrease in carbon and sulphur on conversion of the fibres into powders, as the cortex became exposed on the powder surface. An increased surface concentration of cysteic acid was observed for the chlorinated powder. Rapid uptake of dye by wool powders was observed in situations where there was virtually no uptake by the original fibre. Hydrophobic dyes were more readily sorbed than were hydrophilic dyes. The chlorination treatment led to a decrease in the sorption of acid dyes. Confocal microscopy, used in conjunction with a fluorescent stain, showed that chemicals were able to penetrate wool particles, even at room temperature. The rate and extent of uptake of dye by the finer powders were comparable to that obtained with activated charcoal, even though the surface area of the charcoal was 100 times greater.

Wool powders used as sorbents to remove Co2+ ions from aqueous solution

The Co2+ sorption of two wool powders was investigated using its radioisotope 57Co (T1/2=271.8 days and γ=122.1 and 136.5 keV) as a tracer. The effects of the type of buffer, the pH value, the contact time and the initial concentration of Co2+ on the sorption behaviour of wool powders were studied. The Co2+ releasing ability of wool powders and the re-use of wool powders to sorb Co2+ were also examined. The optimum sorption of Co2+ by the powders occurred at pH 8 in phosphate buffer and pH 10 in ammonium sulphate buffer. Fourier-transform infrared spectroscopy (FTIR) was used to study the changes in chemical structure of the wool after exposure to both buffer solutions. Compared to the untreated wool fibre, the fine wool powders showed rapid sorption rates and high sorption capacities for Co2+. Co2+ ions were recovered after exposing the Co2+ loaded wool to HCl (0.1 M) and buffer at pH 3 (glycine/sodium chloride). After releasing Co2+ ions from wool powders, the efficiency of wool powders re-used to sorb Co2+ was 80% of that of the fresh wool powders. It is concluded from this study that wool powder can be used as an efficient sorbent to remove and release Co2+ from solution.

Protein fiber particles for biomedical applications

Ultrafine protein particles have been fabricated from natural fibres, such as silk and wool. Our studies suggested that particles could be used for fabricating tough macro-porous composites scaffolds for tissue engineering. They are also efficient for reversible binding of metal ions. We are currently analyzing the sorption properties, biocompatibility and biodegradability of a range of particles to evaluate possibility for biomedical and healthcare applications.